Digital Speedometer

One of the most popular and simplest coding changes — enabling a digital speed readout in the instrument cluster.

What It Does

Adds a numerical speed display to your instrument cluster, either:

• In the center of the analog speedometer dial (most common)
• In the lower information area of the cluster
• In the head-up display (if equipped, usually already available)

How to Code It

BimmerCode (Easiest)

1. Connect to your car
2. Select KOMBI (Instrument Cluster) module
3. Find "Digital speed display" or "Geschwindigkeit_digital"
4. Set to Enabled or aktiv
5. Code the module

E-Sys

1. Connect and read the KOMBI module
2. Open FDL Editor
3. Navigate to: GESCHWINDIGKEIT_DIGITAL → set to aktiv
4. Alternatively in HU_MGU: SPEEDOMETER_DIGITAL → enabled
5. Code the module

Applies To

Chassis	Module	Notes
G20 / G21	KOMBI	Works on all cluster types
G30 / G31	KOMBI	Pre-LCI and LCI
G05 / G06 / G07	KOMBI	All variants
G80 / G82	KOMBI	Already enabled on some M models
G70	KOMBI	Confirmed working

Tips

• This is a great first coding change to verify your setup is working
• Completely reversible — just set back to deaktiv
• Does not affect warranty in any meaningful way
• Some Live Cockpit Professional clusters already have this enabled from factory